Expressive E Touché MIDI/CV/USB Control Surface for Software and Hardware Synthesizers

Bring a sense of control into your life with the Touche MIDI/CV/USB Control Surface. With just the slightest and lightest touch, you can control your music, the sounds, and the effects that go with it. Touche reacts with the slightest touch you can put to it and the lightest pressure you apply to it. Connect it with a synthesizer software such as the Lie and you can produce different kinds of sound with matching sound effects, as long as you have a virtual instrument. You can also control a hardware synthesizer to the Touche by directly linking your hand’s movements to the sound. Touché has four independent CV outputs, which means that you can control up to four different parameters at the same time with a clean and pure analog signal. Connect Touché to your instruments with its built-in MIDI output, and configure which Control Changes* Touché sends with Lié. Once you’re done, you can even save that configuration right into Touché’s internal memory. Presets saved in Touché’s memory slots can be recalled when you perform live. This enables you to prepare your entire setup for the next song, and multicolor LEDs help you track which preset you’re using. TECHNICAL SPECS: 4 x independent expression shiftings, with force feedback and sensitivity setting 1 x USB socket 4 x 1/8" CV/Gate outputs 1 x 1/8" MIDI Input (jack socket with MIDI break-out cable) 1 x 1/8" MIDI Output (jack socket with MIDI break-out cable) Touché is USB bus-powered Independently configurable CV signal curve and min/max voltages (up to -10V to 10V.) Independently configurable MIDI CC messages for each shifting. Lié software is available as standalone application, and as a VST2 and AU plug-in only. It is compatible with macOS 10.11 and more, 64bit and Windows 10, 64bit Lié supports Ableton Live 9+, Bitwig 2, Steinberg Cubase 6+, PreSonus Studio One 4, and more. Dimensions: 9.7 x 3.9 x 2.4" Weight: 1.7 lb